Description: 1 1/8” x 16 cap nut – mounts standard single wheels and wide base wheels to 1 1/8” studs and provides additional 1/8” hex height. Also mounts outer dualed wheel to 1 1/8” inner cap nut. Order Part No. 599601 for left thread applications.

Description: 1/8” x 16 cap nut – mounts standard single wheels and wide base wheels to 1 1/8” studs and provides additional 1/8” hex height. Also mounts outer dualed wheel to 1 1/8” inner cap nut. Order Part No. 599602 for right thread applications.

Description: 3/4” x 16 cap nut – mounts standard single wheels and (5995L) wide base wheels to 3/4” studs. Order Part No. 599501 for left thread applications.

Description: 3/4” x 16 cap nut – mounts standard single wheels and (5995R) wide base wheels to 3/4” studs. Order Part No. 599502 for right thread applications.

Description: For use with standard length studs (1.31” to 1.44” stud standout) or longer studs not to exceed 1.88” stud standout. Full external threads, counter bore 5/16” deep at open end. For use with aluminum inner and outer wheels. Prevents stud from bottoming out in cap nut. Order Part No. 598801 for left thread applications.

Description: For use with standard length studs (1.31” to 1.44” stud standout) or longer studs not to exceed 1.88” stud standout. Full external threads, counter bore 5/16” deep at open end. For use with aluminum inner and outer wheels. Prevents stud from bottoming out in cap nut. Order Part No. 598802 for right thread applications.

Description: Inner thread 3/4” x 16, outer thread 1 1/8” x 16. For use with steel inner dual wheels and aluminum outer dual wheel with 1.31” to 1.44” stud standout. Order Part No. 789601 for left thread applications.

Description: Inner thread 3/4” x 16, outer thread 1 1/8” x 16. For use with steel inner dual wheels and aluminum outer dual wheel with 1.31” to 1.44” stud standout. Order Part No. 789602 for right thread applications.

Description: Two-piece, 33mm hex, M22 x 1.5mm, RH thread flange nut. Mounts single and dual wheels to wheel centering hubs. Right hand threads used both sides of vehicle. Single wheels require 2” (50.8mm) stud standout. Dualed wheels require 2 13/16” stud standout.

Description: Two-piece, 33mm hex, M22 x 1.5mm, RH thread, sleeved cap nut. Mounts single aluminum wheels, with 32mm bolt holes, to wheel centering hubs with stud standouts less than 1.92” (48.75mm). Right-hand threads used on both sides of vehicle.

Description: Two-piece, 33mm hex, M22 x 1.5mm, RH thread, sleeved cap nut. Mounts dual aluminum wheels, with 32mm bolt holes, to wheel centering hubs with stud standouts less than 2.85” (72mm). Right-hand threads used on both sides of vehicle.